Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Produktgruppe 512, 522
35 von 36
Note
Required tools:
Level, for vertically and horizontally aligning the stand
10mm wrench, for M6 nuts
Torx T20 screwdriver
Note
Installation kit mat. nos. 07689330 and 07129240 contain:
1 UO 6008 stand (for kit no. 07689330)
1 UG 6008 stand, 1 front panel, 2 side panels, 12 M4 x 12.4 screws (for kit no. 07129240)
1 foundation kit with packet: 4 brackets / 8 zinc-plated B6.4 washers / 4 M6 x 20 hex screws / 4 M6 hex nuts / 4 S12 studs / 4 8.4
washers / 4 8 x 65 hex wood screws / 20 shims / 8 38mm washers
1 packet containing these instructions and startup card.
List of illustrations:
Fig. 1, Stand height
Fig. 2, Drilling dimensions
Fig. 3, Hole dimensions
Fig. 4, Installing the foundation kit
Fig. 5, UO 6008 stand
Fig. 6, Installing the brackets
Fig. 7, UG 6008 stand
Abbreviation
UM
A-A
B
C
Table 1: Abbreviation list
Close the gas supply, if applicable.
Disconnect the machine from the electrical and gas (if applicable) supplies and secure against erroneous switch-on.
Mark the drilling dimensions; see Fig. 2.
Note
The machine must be at least 10 millimeters away from the wall.
Drill 4 12-millimeter holes, 65 millimeters deep, in the floor; see Fig. 3.
Insert the 4 S12 studs flush in the holes; see Fig. 4, Pos. 1.
Align the stand using the shims and the level (Fig. 4, Pos. 2).
Secure the stand to the floor using the 4 8 x 65 hex wood screws (Fig. 4, Pos. 3), 8.4 washers (Fig. 4, Pos. 4) and 38-millimeter
washers (Fig. 4, Pos. 5).
Install the machine on the stand.
Danger!
Risk of spinal injury. Keep in mind the weight of the machine in respect to your own body weight. For machine weights, see the operating
manual.
Make sure that no body parts, especially hands and feet, can get stuck under or between machines.
27.10.2009
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Explanation
Stand
Sectional plane
Foundation kit
Detail view
Umbau- und Montageanweisung
M.-Nr. 07707490
Werbung
