Gecko in.k1000+ Bedienungsanleitung Seite 36

+
1
Keypad functions
Modify the Boost level
The Boost level is used to set the amount of boost
required� As a rule, enter the number of bathers in the
bath� Boost mode is automatically activated 5 minutes
after starting a pump�
Modify the maintenance level
The maintenance level can be changed and must be
tested with a bromine level tester� The tester should report
between 3-5 ppm� If the bromine level is within this range
for 3 consecutive days your maintenance level is correctly
adjusted� If you adjust the maintenance level by more
than 2, you will be prompted to confirm�
35