Herunterladen Inhalt Inhalt Diese Seite drucken

Gecko in.k1000+ Bedienungsanleitung Seite 19

Full-featured color capacitive touchscreen display keypad for spas
Vorschau ausblenden Andere Handbücher für in.k1000+:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

+
1
Keypad functions
Heat pump modes
Eco Heat
In this mode, the heat pump is used as
the unique source of heating� The heating
element is kept off and the heat pump
is not used to cool the water should its
temperature rise above the current set point�
Smart Heat
This mode uses the heat pump as the main
heating source� The heating element is
turned on only if there is a large temperature
difference between the water and the set
point� The heat pump is not used to cool the
water in this mode�
Eco Auto
This mode borrows functionality from both
Eco Heat and Cool modes and has the
ability to select the proper Heat or Cool
mode automatically according to the water
temperature� The heating element is never
activated in this mode�
Disclaimer:
The data provided by this tool is estimated by sampling numerous operating parameters in real time in order to
generate an estimate that is as close as possible to reality� The data is presented to the users with the best intention but
Gecko Alliance inc� makes no warranty about its accuracy or completeness� To increase the accuracy of those estimates,
make sure the heat pump is well maintained and operates in the recommended conditions in regards to water flow, air
exchange through discharge panel, adequate compressor pressure and cleanliness of pipes and heat exchanger�
18
Smart Auto
This mode borrows functionality from both
Smart Heat and Cool modes and has the
ability to select the proper Heat or Cool
mode automatically according to the water
temperature� The heating element is activated
only if there is a large temperature difference
between the water and the set point�
Cool
This mode uses the heat pump in cooling
mode only� The heat pump is not used as a
heating source and the heating element is
never activated�
Electric
This mode keeps the heat pump off and
uses only the heating element to regulate
water temperature�
Est. Energy Saved
Only available with a Gecko Brand Heat Pump (in.temp)
In this section, you can view your estimated kWh economy
graph� These calculations are made while using a in�temp
to heat your spa� The economy estimate can be viewed
in days or months format by pressing the button below
the graph�

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

In.k1001+

Inhaltsverzeichnis