Installation - Alde Smart Control Betriebs- Und Installationsanweisungen

9. InStAllAtIon

Having prepared for the installation, you are safe to proceed.
1. Remove the rear cover of the Alde control
panel. Press the tabs either side and pull.
2. Connect the cable (1) with the white 4-pole
connector to the Alde control panel. There is
a connection diagram inside the rear cover of
the control panel.
3010 and 3020 Alde control panels have dif-
ferent internal layout.
3. Connect the other end of the adaptor cable
(1) to the module, the green connector.
4. Connect the Red wire to a 12 V battery posi-
tive (+) and the Brown wire to a 12 V battery
negative (-).
Follow step 5-7 below if you have other accessories that you wish to connect to the
module. Ensure cable length for any other accessories does not exceed the included
length.
5. Connect the Yellow wire for the "additional output" to an accessory of your choosing.
1
You can set the connected equipment to On or Off in Alde Smart Control App. The
output is specified 12 V and 0.5 A.
6. The Green wire is used for the control of a refrigerator. You can set the connected
equipment to On or Off in the Alde Smart Control App. Check the specification for your
refrigerator if any other devices in between are necessary and how it should be con-
nected. The output is specified 12 V and 0.5 A.
7. Connect the Red/White and brown wire (minus) to an external alarm, e.g. a burglar
alarm.
8. S ecurely fit the module in the vehicle and reconnect the 12 V battery. The antenna
should be as unimpeded by walls, bulkheads and furniture as possible.
9. The communication to the module must be switched on in the Alde panel.
Depending on the panel version it has different names. Look for:
3010613: "Translator" in the settings menu.
3020013: "Translator" in the settings menu.
3020113: "Third Party Panel" in the "Installed Accessories" menu.
Check the panel instruction for more details.
22
All manuals and user guides at all-guides.com
Connect to Alde Control panel
Connect to module
(*) Requires optional parts, not included.
1