Alde Smart Control App - Alarms Menu - Alde Smart Control Betriebs- Und Installationsanweisungen

5. Alde SmArt Control App - AlArmS menu

When an alarm function is enabled and triggered from the vehicle a text message alert is sent to
the user-defined phone number. Three messages are sent for Temperature, Battery Voltage and
External alarms. Then the alarm function is switched off and must be reactivated. 3010 and 3020
errors will generate one message.
1. Enable (On) or disable (Off) all alarms.
2. Indoor temperature— Set alarm temperature, and enable/disable the temperature alarm.
The alarm triggers if the indoor temp falls below set value.
3. 12 V Voltage— Enable/disable alarm. The alarm triggers if the leisure battery voltage falls
below 11 V.
4. Enable/disable external alarm *. E.g. from a burglar alarm IR-detector.
5. Enable/disable alerts from the Alde heating system.
Return to Main Menu.
Send and action all alarm settings to the module in the vehicle. Be aware of that
your settings will first be sent to the module after you also have sent the generated
SEND
SMS text message that shows up in your smartphone.
(*) Requires optional parts, not included.
All manuals and user guides at all-guides.com
1
2
3
4
5
19