Alde Smart Control App - Settings Menu - Alde Smart Control Betriebs- Und Installationsanweisungen

4. Alde SmArt Control App - SettIngS menu

1. Enter the phone number for your module.
2. Set your own PIn code for your module to prevent unauthorised access. The factory de-
fault PIn code is 0000. To restore the factory default setting, press and hold the white but-
ton on the module for 10 seconds. (This is not the same as the SIM card PIn code)
3. Enter a phone number for alarms from the module. This number will receive any SMS text
message alerts sent by the module if alarms are triggered.
4. Select type of Alde heating system installed, i.e. 3010 or 3020.
Return to Main Menu.
Info about the Alde Smart Control system.
i
Send and action the settings to the module in the vehicle. Be aware of that your
settings will first be sent to the module after you also have sent the generated SMS
SEND
text message that shows up in your smartphone.
18
All manuals and user guides at all-guides.com
1
467071234567890
3
2
4
(*) Requires optional parts, not included.