Cleaning And Maintenance; Disposal Of Old Electrical Appliances; Technical Support And Warranty; Technical Specifications - cecotec FAST&FURIOUS 5050 X-TREME Bedienungsanleitung

ENGLISH

4. CLEANING AND MAINTENANCE

Outside surface of the iron
After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth
and, if necessary, a mild detergent.
Warning: Do not use any abrasive cleaning agent.
Soleplate
Starch and other types of residue may be easily removed from the soleplate with a damp cloth.
To avoid scratches on its finish, do not use metallic scouring pads to clean the soleplate and
never place the iron on a rough surface. If synthetic fabrics are ironed at high temperature, both
the fabric and the soleplate of the iron could be damaged. The best way to remove synthetic
residue from the soleplate is to heat it up and iron over an old cotton rag.
Warning: Do not use steam iron cleaners in this iron, since they could damage its parts.
Auto-cleaning
Note: In order to perform best results, use the auto-clean function once per month, or more if
required according to the use.
Fill half of the water tank with water and leave the steam selector in off position.
Place the iron in vertical position.
Plug the iron.
Set the iron's highest temperature option.
Allow the iron to heat up until the LCD display stops flashing.
Unplug the iron from the mains supply and keep it in a horizontal position over the sink.
Hold down the auto-clean button until all boiling water, steam and impurities are emitted.
Clean the soleplate with a clean cloth once it has cooled down.
Storage
Disconnect the iron from the mains supply.
Empty the tank by turning the iron upside down and gently shaking it.
Allow the iron to cool down completely.
Wind the power cord around the base of the iron.
Store the iron in a vertical position.

5. TECHNICAL SPECIFICATIONS

Product reference: 05524
Product: Fast&Furious 5050 X-Treme
2290-2720 W, 220-240 V~, 50/60 Hz.
Made in China | Designed in Spain
40 FAST&FURIOUS 5050 X-TREME

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

7. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
FAST&FURIOUS 5050 X-TREME 41