Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
19743 Tablet PC holder »Biobased«
13. ADJUSTMENTS - OVERVIEW
9.3
HEIGHT
min.158 mm
max. 280 mm
infinitely
variable
9.2
WIDTH
min.150 mm
max. 330 (430) mm
11
FORMAT
horizontal - vertical
Portrait - Landscape
90°- stepless swivelling
MAINTENANCE
- Careful handling maintains the function and safety of the installation
- Regularly check the proper condition of the components; defective parts must be
-
replaced or repaired
- Ensure that the screw and plug connections are firmly seated before use
- Always remove the tablet PC first when carrying out maintenance and cleaning work
- For cleaning and maintenance, use a slightly damp cloth and a non-abrasive
-
cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Tablet PC sits off-centre
F:
B: Position Guard arm c accordingly (Chapter 4)
F:
B: Tablet PC wider than 330 mm (9.2)
F: Tablet PC wobbles
F:
B: Set slider tighter (7.6)
F:
B: Clamping too loose, tighten if necessary (7.7)
F:
B: Tablet PC is smaller than the minimum dimension of 158 mm (9.3)
F: Tablet PC holder wobbles
F:
B: Swivel joint a screwed too loosely to the support arm d
F: B:
Check wing screw e and tighten if necessary (Chapter 2 and 12)
F:
B: Not properly engaged? Place cradle b and engage it correctly (Chapter 5)
F: Cradle b cannot be pulled off swivel joint a
F:
B: First press lever, then unlock cradle a and pull off (Chapter 6)
F: Support arm d does not clamp properly to the stand (wobbles/slips off)
F:
B: Stand tube too small (min. ø 11 mm) or too large (max. ø 30 mm)
F:
B: Replace defective components (rubber insert, clamping screw).
TECHNICAL DATA
Swivel joint, handles: Polyamid (PA)
Tablet Cradle: Bio-based plastic
Material
Support arm, Guard arm, screw connections: steel, brass
Clamp: Aluminum profile
Caps, foam rubbers, rubber washers: TPE, EPDM, TPU
Load capacity
Tablet PCs (check dimensions)
for Tablets ~10" - 16"; for stand tubes ø 11-30 mm
Dimensions
width 150-330/430 mm, height 158-280 mm, depth: 20 mm
Cardboard
240 x 120 x 180 mm
Weight
netto: 0.7 kg, brutto: 0.8 kg
12.A
DIRECTION
360° all around
10
TILT
from vertical
to horizontal:
90°- stepless
swiveling
9.1
DEPTH
20 mm
14. DIMENSIONS
19743-000-55 Rev.3A 03-80-501-00 3/21
12.B
DIRECTION
360° all around
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
Werbung
Inhaltsverzeichnis
