Turning On/Off The Key-Touch Tone (Only For Ks-Fx850R); Selecting The External Component To Use - JVC KS-FX850R Bedienungsanleitung

Turning on/off the key-touch tone
(ONLY FOR KS-FX850R)
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON: Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "BEEP" with
3. Select the desired mode with the control dial.
The key-touch tone alternates between on and off.

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
• LINE IN:
• CHANGER:
1. To change the source to FM, AM or TAPE, press FM/AM or TAPE 2 3 .
2. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
on the display.
3. Select "LINE IN" with
4. Select the desired mode with the control dial.
The external component selecting mode changes as follows:
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
30
¢ or 4.
ON
To use the external component other than CD changer
To use the CD changer
¢ or 4.
LINE IN
OFF
CHANGER