ATH W62 LCD 2D Bedienungsanleitung Seite 83

On the results page, the machine displays the
maximum optimisation that is possible.
Now mark the points which are displayed on the
rim and the tyre.
Now both markings can be mounted on a line
using a suitable tyre changer.
/
The balancing process can be started again by
using the STARTbutton or by closing the wheel
protector.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 17 -