Notes; Maintenance Or Service Plan - ATH W62 LCD 2D Bedienungsanleitung

4.3

Notes

Regardless of the level of dirt, the machine must be maintained, cleaned and serviced at
regular intervals.
The machine should then be treated with a care product (such as oil or wax spray).
Do not use cleaning agents that are harmful to the skin.
IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS
EXCLUDED
4.4

Maintenance or Service Plan

Interval
Check of ALL safety-relevant parts
Cleaning
Check or restore surface protection
Check for leaks in the hydraulic system
Check or restore surface protection or corrosion protection
Check or restore damage to the paint and components
Check or restore rust damage
Check or treat cavities and non-painted areas
Check for leaks in the pneumatic system
Control the tightness of screws
Check, lubricate & adjust bearing slack
Check wear parts
Check fluids (level, wear, contamination, quality)
Check and lubricate sliding surfaces
Remove any dirt inside
Clean and check electrical components
Check motor and transmission for function and wear
Check welds and construction
Visual inspection (according to inspection plan)
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 44 -
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X