ATH W62 LCD 2D Bedienungsanleitung Seite 103

Service calibration of the gauge
Press F2 in the calibration programme and follow the instructions on the screen:
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Calibration of the gauge
CALIBRATING THE DISTANCE GAUGE
1. Position the gauge to 100 mm at the point which is specified
2. Press the [OK] button
Calibration of the gauge
CALIBRATING THE DISTANCE GAUGE
1. Position the gauge to the point which is specified 215 mm
2. Press the [OK] button
Manufacturer ATH-Heinl GmbH & CO.KG
- 37 -