Care And Maintenance - KNsing EF455SL-E Aufbau- Und Bedienungsanleitung

Timer switch
4.
The timer is turned on and off via the "TIMER ON/OFF" switch. When the device is restarted after it has been
disconnected from the power supply, the timer settings will remain intact. However, the current date and time must
be adjusted.
Note: If the timer is activated, you should turn on the heating function. Otherwise, only the flame effect will work.
Thermal safety shut-down
The device is equipped with a safety shut-down feature that is activated when the device becomes too hot (e. g.
if ventilation slots are blocked). For safety reasons, the device cannot be reset automatically. Before using the
device again, separate it from the socket for at least 15 minutes, to allow it to cool.
Power connection
Danger!
Electrical installation work may only be carried out by authorised specialists. If you need an additional
socket for the device, please contract a specialist electrician.

Care and maintenance

Care
Store the device in its original box, in a dry place that is protected against water and humidity.
The flame effect of this device is not operated by means of a standard lamp. The device uses an electronically
controlled LED system to generate its effect. As a result, no parts need to be replaced. This device does not con-
tain any parts that can be serviced by the user. The device must not be serviced by any individuals other than a
qualified electrician, under any circumstances.
Cleaning
Danger of electric shock!
A lways disconnect the device from the power supply, before cleaning your electric fireplace.
Do not start any maintenance or cleaning tasks before the device has cooled down completely.
Use a soft and clean dust cloth for general cleaning. Never use any abrasive products or aggressive
detergents.
D o not use any abrasive chemicals for cleaning the electrical fireplace.
The glass screen should be cleaned carefully, using a soft cloth. DO NOT use glass cleaners.
- 28 -