Operation - Knsing Ef455Sl-E Aufbau- Und Bedienungsanleitung

Operation

General information
Unpack the electrical fireplace carefully and keep the packaging for future use, for example in case
you need to pack up the device if you are moving, or to return it to your specialist retailer.
Do not connect the heating device to the power supply, before it has been properly installed.
Note: If the device is used in an environment with only minor background noise, you may be able to
hear the sound of the motor used to operate the flame effect. This is normal and you do not need to
be concerned.
Warning
The device is not equipped with a device for controlling the room temperature. The heating device
must not be used in small rooms that are occupied by individuals who are unable to independently
leave the room, unless constant supervision is ensured.
Electrical connection
WARNING: THIS DEVICE MUST BE GROUNDED
Operation
The device can be operated via the switch on the right-hand side of the front of the electrical fi-
replace, or using the included remote control.
Date
Cursor
Heating Power
Reset Position
Timer
- 25 -
Temperature / Timer Selection
Timer Off Time
Timer On Time
Time / Temperature
Automatic Heater Control
Brightness of Flames