Door Reversibility; Control Panel; Switching Off; Temperature Regulation - JUNO JCU178E8S1 Benutzerinformation

8
min.
5 cm
200 cm
CAUTION! Refer to the
installation instructions for the
installation.

CONTROL PANEL

2 1 1 2
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. FastFreeze indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. FastFreeze button
Temperature regulator
Switching on
1. Insert the plug into the wall socket.
2. Touch the ON/OFF button (6) if all
LED indicators are off.
2
min.
2
200 cm
2 3 2 4 5 2
7 4 6 3

Door reversibility

Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION! At every stage of
reversing the door protect the
floor from scratching with a
durable material.

Switching off

Keep touching the ON/OFF button (6) for
3 seconds.
All indicators light off.

Temperature regulation

Before regulating the temperature, it is
necessary to select the compartment
(fridge or freezer).
The upper or lower cavity is selected by
the compartment selection button (6).
To select the freezer compartment touch
the compartment selection button (6) until
LED corresponding to the lower cavity
lights up.
The temperature LED indicator shows the
latest set temperature. Recommended
setting is -18°C.
To select the fridge compartment touch
the compartment selection button (6) until
LED corresponding to the upper cavity
lights up.
The temperature LED indicator shows the
latest set temperature. Recommended
setting is +4°C.
To set temperature: