Safety Information - Huawei WATCH Kurzanleitung

Charging a HUAWEI WATCH
Connect a charging adapter to the socket.
1
Connect the HUAWEI WATCH wireless charger (charger for short)
2
to the adapter.
Place the rechargeable area of your watch onto the center surface
3
of the charger. Charging will begin on contact. (To locate the
rechargeable area of your watch, please refer to the user manual
of the watch.)
Note: The charging adapter must be purchased separately.
Charger
Watch

Safety Information

Before using the charger, read the following precautions:
• In places where the use of wireless devices is prohibited, comply
with the regulations and do not use your charger.
• The charger contains a magnet, which may affect normal
operation of implantable medical devices or personal medical
devices, such as pacemakers, cochlear implants, and hearing aids.
Consult the manufacturer of your medical devices for more
information. When using the charger, keep it at least 30 cm away
from implantable medical devices.
• Keep the charger dry. Avoid using it in dusty, damp, or dirty
environments, as such environments may cause charger
malfunction. Do not splash water on the charger. Keep the charger
away from fire and do not ignite it.
• Do not use the charger during thunderstorms, as thunderstorms
may cause charger malfunction or a shock hazard.
• Only use the charger within its approved operating range of –10°C
to +45°C, and only allow it to be exposed to temperatures within
its approved storage range of –40°C to +70°C. Extreme heat or
cold may cause charger malfunction.
• If the charging adapter needs to be replaced, the output of the
adapter must match the specifications of the charger, and must
comply with IEC/EN 62368-1 "Audio/video, information and
communication equipment – Part 1: Safety requirements" and
IEC/EN 60950-1 "Information technology equipment – Safety –
Part 1: General requirements."
• If the charger needs to be connected to a USB port, ensure that
the USB port is USB-IF certified, and that it complies with USB-IF
standards.
Charging adapter
1
Socket