GLO Hyper Gebrauchsanleitung Seite 4

5 Clean
Ensure the glo™ tobacco heater has been allowed to cool for a
EN
minimum of 5 minutes before cleaning.
Open the cleaning door at the bottom of the glo™ tobacco heater.
Use a tissue to wipe away any
collected moisture from the bottom
of the device and cleaning door.
For best performance, moisture
at the cleaning door and bottom
of the glo™ tobacco heater needs
to be removed after every 5 sessions.
To clean the inside of the heating chamber, open the slider door at the
top and the cleaning door at the bottom of the glo™ tobacco heater.
Clean the heating chamber using
the brush provided. For best
results, clean from both ends
as required. For best performance,
the glo™ tobacco heater cleaning
chamber needs to be cleaned
after 20 sessions.
How to clean the
cleaning brush
Simply rinse brush under running water.
Please make sure that the cleaning
brush is dried when using again with
glo™ tobacco heater.
WARNING!
ATTEMPTING TO REMOVE DEBRIS BY FIRMLY
TAPPING OR SHAKING THE glo™ TOBACCO
HEATER MAY RESULT IN DAMAGE
After x5
sessions
After x5
sessions
1 2
1 2
After x5
sessions
1 2
6
EN