HEIDENHAIN EIB 5000 Serie Betriebsanleitung Seite 45

4 Mounting
4.1 Overview
This chapter describes the Mounting procedure for the
product.
The following steps must be performed only
by qualified personnel.
Further information:
Page 39
HEIDENHAIN | EIB 5000 | Operating Instructions | 11/2020
"Personnel qualification",
4.2 Mounting the EIB 5000
4.2.1 EIB 5181
Variant 1
15
Figure 5: Mounting variant 1 with adapter
Mount the EIB 5181 with the top hat rail adapter to a
top hat rail (depth: min. 15 mm)
Recommended: EN 50022, 35 mm x 15 mm
Connect the protective ground to the appropriate M5
thread of the housing
45