About These Instructions - HEIDENHAIN EIB 5000 Serie Betriebsanleitung

1 Fundamentals
1.1

About these instructions

These instructions provide all the information and safety
precautions needed for the safe operation of the device.
In addition to the information provided in the
following, the "General electrical information"
in the HEIDENHAIN brochure "Interfaces
of HEIDENHAIN Encoders" applies to the
connection of the encoder.
1.2 Information on the model
Product ID
designation
EIB 5181 1231387-xx
EIB 5211 1296676-xx
EIB 5212 1264480-xx
EIB 5281 1281777-xx
EIB 5282 1296675-xx
HEIDENHAIN | EIB 5000 | Operating Instructions | 11/2020
Config- Switching
urable outputs
✓
✓
✓
ID label
The ID label is provided on the side panel of the product.
Example:
1
EIB 5xxx
2 EnDat01
8.00
3KTY84-130
www.heidenhain.de
1 Product designation
2 ID number
CE mark
The product is CE-marked in accordance with EMC
Directive 2014/30/EU and the Low Voltage Directive
2014/35/EU.
1.3 Notes on reading the documentation
WARNING
Fatal accidents, personal injury or property
damage caused by non-compliance with the
documentation!
Failure to comply with the documentation may result in
fatal accidents, personal injury or property damage.
Read the documentation carefully from beginning to
end
Keep the documentation for future reference
The table below lists the components of the
documentation in the order of priority for reading.
Z12
35