Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
u
NpaCkiNg
•
Remove the shipping box.
•
Check that the appliance has not been damaged during transport. Do not plug
in a damaged appliance under any circumstances! If the appliance is damaged,
please contact your retailer.
•
Remove all tape and packaging materials on the inside and outside of the
appliance. Take out the accessories (ice cube tray, egg holder, etc.) that may have
been supplied with the appliance.
p
relimiNary CleaNiNg
•
Clean the inside of the appliance and any accessories provided with lukewarm
water with a little white wine vinegar added to it. Do not use soap or detergent
as the odour may linger. After cleaning, completely dry the appliance.
•
You can use white spirit to remove any remaining adhesive from the outside of
the appliance.
To clean the appliance, always turn it off and unplug it, or remove the fuses or
turn off the circuit breaker.
i
NstallatioN loCatioN
WARNING: To avoid any risk due to the instability
of the appliance, it must be secured as per the
instructions.
•
Place your refrigerator on a stable, level surface. Your appliance will be heavy
when loaded with food: it must, therefore, be placed on a strong, solid floor.
•
The appliance must be installed in a dry, well-ventilated room at room temperature
(16°C minimum and 32°C maximum). Be sure to leave a space of at least 10 cm
on the sides of the appliance and 20 cm above it. Also allow enough space for the
door to open.
•
Never place an appliance that emits heat (microwaves, toasters, etc.) on the
V.1.0
BEFORE FIRST USE
SET-UP
20
Werbung
Inhaltsverzeichnis
Fehlerbehebung
