Team Orion ADVANTAGE ONE DUO Bedienungsanleitung Seite 18

Procedure LiPo/LiFe
 Select the charge channel, 1 or 2.
 Select memory profile 1 to 5, CHG mode and adjust
the charge settings if necessary.
 Connect the battery to the charger using the
charge lead.
 Connect the battery balancing connector to the
correct balancing port on the charger.
 Press the START/STOP key to start the charge.
 Once the charge is completed, press the START/
STOP key to display the final charge data.
 Press the START/STOP key again to return to the
main screen.
 Disconnect the battery.
18 - English
Charging NiMH/NiCd batteries
NiMH/NiCd batteries require only one connection to the
charger. NOTE: In NiMH/NiCd mode the charge will stop
when the charged mAh counter reaches the preset mAh
value, whether the battery is full or not.
Procedure NiMH/NiCd
 Select the charge channel, 1 or 2.
 Select memory profile 6 to 10, CHG mode and adjust
the charge settings if necessary.
 Connect the battery to the charger using the
charge lead.
 Press the START/STOP key to start the charge.
 Once the charge is completed, press the START/
STOP key to display the final charge data.
 Press the START/STOP key again to return to the
main screen.
 Disconnect the battery.
Team Orion Advantage ONE Duo