S+S REGELTECHNIK THERMASGARD Serie Konfigurationsanleitung Seite 24

G
EtherCAT P | Configuration (general)
The configuration register Bar Graph Display Mode ( 0x80n1 ) describes the bar variant using the UNI- or BI-directional orientation
and the defined display type of the seven segments of the bar graph.
Value Direction
0 UNI
1 UNI
2 UNI
3 UNI
4 BI
5 BI
6 UNI
7 BI
The designations OK, WRN and ERR identify
the display ranges and can be preselected in colour
using the address (0x80n2) and (0x80n3).
The Colour Setting Register (0x80n2) is used to specify the
colour directly using the code numbers from 0-6.
Code number 7 describes the RGB colour setting
by means of the colour register ( 0x80n3 ) .
Brightness change equivalent to gradient
The graphs below show the dependency between brightness change and gradient
between the user-defined values for Warning Level (WRN) and Error Level (ERR).
(AP = working point)
WRN AP
min
ERR
min
Display type (segment 1-7)
OK OK OK OK
OK OK OK OK
OK OK OK WRN WRN
OK OK WRN WRN WRN
ERR OK OK
WRN
ERR WRN WRN OK
OK
WRN OK
WRN
max
WRN AP
min
Colour change
OK OK OK By segment
OK WRN ERR By segment
ERR ERR By segment
ERR ERR By segment
OK ERR
WRN By segment
WRN WRN ERR By segment
ERR Colour gradient from left to right
ERR Colour gradient from middle outwards
Value Colour
0 White
1 Yellow
2 Orange
3 Red
4 Violet
5 Blue
6 Green
7 Colour register (RGB, 8 bit)
ERR
max
WRN
max
24
UNI-directional
Example
Display type
Value 2
BI-directional
Example
Display type
Value 4
ERR
max