Pkm GT 200A+++ Bedienungsanleitung Seite 67

1. The appliance has been switched off for
a while.
2. Too much or too hot food in the appliance.
3. The door of the appliance is opened too
often or too long.
1. The door is not properly closed.
2. The door seal is damaged or soiled.
The door makes a strange sound when opened
1. The door seals are soiled.
1. The appliance is not installed on a flat
and level ground.. The appliance
touches a wall or another object.
2. Frozen food is stored improperly.
3. Items have dropped behind the appliance
1. The water outlet is not closed properly.
1. The LED light source is defective.
If the appliance shows a malfunction not noted on the schedule above or if you have che-
cked all items on the above schedule but the problem still exists, please contact the after-
sales service.
NOTICE! In case of a power failure the current settings will be secured and main-
tained until the appliance is supplied with power again (max. storage time / malfunction:
s. chapter TECHNICAL DATA).
The operating conditions described below are normal
✤ The refrigerant generates a sound similar to flowing water.
✤ Sometimes you may hear a sound which is generated by the injection process of the
cooling circuit.
✤ The sides of the appliance may get warm while the appliance is running.
The compressor operates for too long
Formation of encrusted ice
Uncommon noise
Water drips on the floor
The lighting does not work
and do not indicate a malfunction.
67
1. The appliance needs some time to reach
the preset temperature.
2. Remove any hot food.
3. Do not open the door too often/too long.
1. Close the door properly.
2. Clean and / or replace the door seal.
1. Clean the door seals.
1. Install the appliance properly.
2. Store food properly.
3. Remove the items.
1. Refer to replace LED lights in cleaning
and care chapter.
1. See chapter CLEANING AND CARE.