On The Remote Control - DELTA DORE TYXIA 641 Installationsanleitung

5/ TROUBLESHOOTING
D
Remove an association (the removal method varies according to the
transmitter associated, refer to the transmitter's user guide)
Example of removing a remote control association.
On the receiver:
- Press the receiver button for 10 seconds until the LED flashes rapidly, release.

On the remote control:

- Press the and
- Make sure that the receiver LED has stopped flashing. The products are no longer
associated.
E
Remove all associations
- Press the receiver's button for 20 seconds.
- Press and hold until the LED switches off after the rapid flashing phase.
- Release. The receiver has no wireless connection.
F
Factory reset
- Press the receiver button for 30 seconds, the LED flashes then switches off,
The receiver has no wireless connection and the configuration is reset (mode 1 by
default).
50
buttons for 3 seconds.