Accessories - Zanussi ZOB65902XU Benutzerinformation

NOTES ON CLEANING
Cleaning
Agents
Everyday
Use

Accessories

STAINLESS STEEL OR ALUMINIUM OVENS
Clean the oven door with a damp cloth or sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials
as they can damage the oven surface. Clean the
oven control panel with the same precautions.
CLEANING THE CAVITY EMBOSSMENT
The cleaning procedure removes limestone residue
from the cavity embossment after cooking with
steam.
For the function: True Fan Cooking
PLUS we recommend to do the
cleaning procedure at least every 5 -
10 cooking cycles.
1. Put 250 ml of white vinegar into the cavity
embossment at the bottom of the oven.
Use maximum 6% vinegar without any
additives.
2. Let the vinegar dissolve the residual limestone
at the ambient temperature for 30 minutes.
3. Clean the cavity with warm water and a soft
cloth.
CLEANING THE DOOR GASKET
Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the oven if the door gasket is damaged.
Contact an Authorised Service Centre.
26
Clean the front of the oven with a soft cloth with warm water and a mild cleaning
agent.
To clean metal surfaces, use a dedicated cleaning agent.
Clean stubborn stains with a special oven cleaner.
Clean the oven cavity after each use. Fat accumulation or other food remains may
cause fire. The risk is higher for the grill pan.
Moisture can condense in the oven or on the door glass panels. To decrease the
condensation, operate the oven for 10 minutes before cooking. Dry the cavity with
a soft cloth after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with warm
water and a cleaning agent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using aggressive agents, sharp-edged ob-
jects or in a dishwasher.
To clean the door gasket, refer to the general
information about cleaning.
HOW TO REMOVE: SHELF SUPPORTS
To clean the oven, remove the shelf supports.
CAUTION! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
1
Install the removed accessories in the opposite
sequence.
2