General; Compatible Products - Nibe Rmu S40 Installateurhandbuch

General

With RMU S40 you can control and monitor your NIBE
heat pump/indoor module/control module (main product)
from another room in the house.

COMPATIBLE PRODUCTS

Main products in NIBE S-series.*
*RMU S40 is not compatible with SMO S30.
CONTENTS
K IT C H EN K IT C H EN
2 2 . 3 ° 2 2 . 3 ° 2 2 . 3 °
r r r
Ou td oo Ou td oo Ou td oo
-5 .6 ° -5 .6 °
ar y
05 Ja nu
12 :4 5
1 x RMU S40 with rear panel
NIBE RMU S40 | GB
MOUNTING
RMU S40 can be installed directly against a wall or with
the aid of the enclosed rear panel. If you use the en-
closed rear panel, you can install RMU S40 in a standard
connection box.
If you want to use the room sensor in RMU S40, the
position of the unit is important, see section
sensor.
Use all mounting points and mount the module upright,
flat against the wall. Leave at least 100 mm of free space
around the module to allow access and make cable
routing easier during installation and servicing.
Caution
The screw type must be adapted to the surface
on which installation is taking place.
INSTALLATION WITHOUT REAR PANEL
1. Unscrew 2 screws at a distance of 32 mm.
2. Connect RMU S40 to the main product, see section
"Electrical connection".
Hang RMU S40 on the screws.
3.
Room
17