Technical Characteristics; Important Safety Warnings - Fagor CA-50 Gebrauchsanweisung

interior.qxd 5/1/05

1. TECHNICAL CHARACTERISTICS

Voltage - Frequency: 230V~50Hz.
Power:
These appliances comply with the guidelines
set out in the European Electromagnetic
Compatibility Directive 89/336/EEC.

2. IMPORTANT SAFETY WARNINGS

• Before using the appliance for the first
time, read this instruction manual
carefully and keep it for later
reference.
• Before using the appliance, ensure
that the domestic mains voltage is the
same as that indicated on the
appliance itself.
• On removing packaging, check the
appliance is in perfect condition. In
case of doubt, contact the nearest
Technical Assistance Service.
• This appliance is for domestic use
only. Do not use it out of doors.
• In case of breakdown or
malfunctioning, switch off the
appliance. Do not attempt to repair it.
If any repairs are necessary, they
must be done by a Technical
Assistance Service authorised by the
manufacturer. Insist on the use of
original spare parts.
• The user must not replace the cable.
If it is damaged or needs replacing,
this must only be done by a Technical
Assistance Service authorised by the
manufacturer.
• The manufacturer holds no liability for
any damages arising from unsuitable
or improper use of the appliance or
from repairs carried out by non-
qualified personnel.
• This appliance must not be used in
bathrooms or showers or in damp
spaces. Do not use it in areas with a
temperature of over 40ºC.
13:52 Página 4
GB
40W.
5
• Do not use the appliance if the cable
or plug are damaged.
• Do not pull on the cable to remove
the plug.
• Before plugging in the appliance,
press the "0" button to ensure it is in
stop position.
• Unplug the appliance when not in
use, before cleaning or maintenance
and before moving the appliance.
• Keep the appliance out of reach of
children and disabled people.
• Do not push any objects through the
grilles.
• Do not place the fan beside sources
of heat or on hot surfaces.
• Do not cover the air grilles.
• DO NOT SUBMERGE THE
APPLIANCE IN WATER.
3. ASSEMBLY INSTRUCTIONS
Before assembling the fan, take the
different parts out of the packaging and
check that the supply cable is not damaged
and that the appliance has not received any
knocks during transport. If the appliance is
damaged, do not switch it on.
1A.- Assembling the base
1A.1 - Lie the radiator down on a
carpet or similar non-hard
surface so as not to damage it.
1A.2 - Assemble the rear part of the
base.
1A.3 - Run the cable along the groove
in the base.
1A.4 - Assemble the front part of the
base.
1A.5 - Fix the base in place using the
screws.