PowerMax cam unit SN5650-PMOL-0065 — SN5650-PMOL-0400
3.1 Description of the construction types
The cam is equipped with guide elements out of bronze-graphite. The working surface is out of cast iron.
Attention:
The mounted gas springs serve for the additional reset of the cam slide.
The working powers which are necessary for the operation are absorbed
by the active return.
4. Scope of delivery
The PowerMax cam units are delivered preassembled and with a precise guide clearance.
The mounted gas springs, unless otherwise desired, are delivered with maximal filling pressure.
The working surface can already contain client-specific insertions.
All cams can also be produced for the machining of high strength sheets, contrary to the angles in five
steps described in the catalogue, in all intermediate angles according to customers' requirements.
Please contact us.
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
I
Operating instructions -- PowerMax cam unit PMOL
7