Description Of The Construction Types; Scope Of Delivery - Strack PowerMax SN5650-PMOK-0065 Bedienungsanleitung

PowerMax cam unit SN5650-PMOK-0065 — SN5650-PMOK-0165

3.1 Description of the construction types

The compact cam is equipped with guide elements out of sintermetal, the working surface is out of cast
iron and the active return can be adjusted.
Attention:
The mounted gas springs serve for the additional reset of the cam slide.
The working powers which are necessary for the operation are absorbed by the
active return (only Medium- and Premium version).

4. Scope of delivery

The PowerMax cam units are delivered preassembled and with a precise guide clearance.
The mounted gas springs, unless otherwise desired, are delivered with maximal filling pressure.
The working surface can already contain client-specific insertions. Also Premium special mounting
plates belong to these.
All cams can also be produced for the machining of high strength sheets, contrary to the angles in five
steps described in the catalogue, in all intermediate angles according to customers' requirements.
Please contact us.
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
PowerMax
I
Operating instructions -- PowerMax cam unit PMOK
7