LEXIN LX-FT4 Pro Bedienungsanleitung Seite 6

Installing Speakers:
Note: The speaker with the shorter wire is for the left ear and the speaker with the longer wire is for
the right ear.
Step 1: Place the speakers into the helmet's inner padding.
Step 2: Push the speakers and microphones firmly against the Velcro pads. If the helmet has deep ear
pockets, you can use the provided spacers to place the speakers closer.
Step 3: Press the wires between the helmet liner and shell.
Mounting the Lexin FT4 Pro Unit to Bracket:
Mount the Lexin FT4 Pro main unit on the bracket. Insert the device into the top clip, then press in
the bottom until it clicks into place.
To remove the main unit from the bracket, press the top part of the bracket and
take it out.
4