Herunterladen Inhalt Inhalt Diese Seite drucken

Bluetooth Intercom Connection For 2-4 Units - LEXIN LX-FT4 Pro Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für LX-FT4 Pro:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
To enter pairing mode:
Step 1: Power on the Lexin FT4 Pro, press and hold the B Button for about 2 seconds until the LED
begins flashing blue and red.
Step 2: Follow your other units Bluetooth pairing instructions to enter pairing mode.
Step 3: Click the B Button on Lexin FT4 Pro to pair. Once pairing starts, the LED on the Lexin FT4
Pro unit will flash only blue.
Step 4: To initiate universal intercom, double click the B button to initiate intercom.
Note: Some non-Lexin intercoms are programmed to only allow universal intercom initiation from
their units.
Lexin FT4 Pro devices can be paired with up to three other Lexin devices. Intercom allows you to
quickly speak to another rider in your group who has a paired Lexin device.
Before connecting devices: Clear any existing connection. Press and hold the A Button and B
Button together until the LED trim flashes red. Repeat this on all devices.
How to Pair 2-4 Lexin FT4 Pro devices for intercom:
Step 1 Pairing unit one with
unit two:
- Power off both units.
- Press and hold the A Button
on both devices.
- LED of both units will flash
red and blue when they enter
pairing mode.
- Click the A Button on either
unit to pair. Once pairing
starts, the LED on the unit
clicked will flash only blue.
- When pairing is complete,
the LED will blink blue on
both units.
Universal Pairing

Bluetooth Intercom Connection for 2-4 units:

Step 2 Enable intercom
talk: Connect unit one with
unit two: -Click the A Button
on unit two or unit one.
-Chat will be enabled and you
can speak to other rider(s).
- The LED will flash 3 times
in blue every 3 seconds on
both units indicating they are
connected.
Two Devices:
9
Step 3 Disable intercom
talk:
Disconnect units:
- Click the A Button or Jog
Dial on either unit. Only one
unit needs to click the A
button to initiate, not both.
-When disconnected you will
see the LED blinking blue on
both units.
Note: The unit will revert to
the previous mode when
intercom is disabled. (Music,
GPS, etc.)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für LEXIN LX-FT4 Pro

Inhaltsverzeichnis