Safety Instructions - Klarstein SPIN DOCTOR Bedienungsanleitung

EN
8

SAFETY INSTRUCTIONS

• Never attach the fan to a power point,but to the ceiling itself.
• The minimum distance between the blades of the fan and the floor must be more
than 2.3 m.The minimum carrying capacity of the hook from which the fan is hung
must be 100 kg.
• Make sure to install all poles disconnection switch having a contact separation of at
least 3 mm between poles in the supply wiring to the ceiling fan.
• The model or type reference of luminaries which may be installed in fans which are
constructed for his purpose.
• Switch off the power before connecting.
• The electrical wiring must be in accordance with the local regulation.
• The fan must be properly earthed to avoid the risk of electric shocks.
• Never mount the fan in a moist or wet room.
• Be careful when working near the rotating blades.
Note: Always have your fan installed by someone who is knowledgeable about
electrical wiring.
INSTALLATION
1
Locate and mark the
canter of the joist. Pass
the supply wires throught
the hole in the bracket.
Secure the bracket to
the ceiling joist by using
the flat washers, sping
washers and wood
screws.
2
Hang the fan onto the
bracket hook by using
one of the holes at the
top of the upper canopy
screws.
3
Connect wires from supply
and the wiring terminals as
the photo.
Brown wire: "L"
Blue wire: "N"
Green/Yellow wire: