Technical Data; Safety Instructions - Klarstein Silent Service Handbuch

EN
20

TECHNICAL DATA

Item number
Power supply
Remote control
Operation frequency
Transmission power
LED
Max. fan flow rate
Fan sound power level
Weight

SAFETY INSTRUCTIONS

• Remove the packaging and make sure that no parts have been damaged during
transport. If any parts have been damaged, contact customer service immediately.
• Children may be injured by the packaging materials and old equipment. Dispose of
the packaging material immediately.
• Children over the age of 8 and persons with reduced physical, sensory or mental
capabilities or those with a lack of experience and knowledge may only use the
device if they are instructed on how to do so by a person responsible for their safety
who understands the associated risks.
• Check the voltage on the device label before use. Connect the device only to mains
sockets that correspond to the voltage of the device.
• Only use the device for the intended purpose as described in the operating
instructions.
• Follow the instructions carefully during assembly. An incorrect assembly procedure
can lead to irreparable damage to the device.
• Turn off the power and disconnect the power cord before cleaning or when the
device is not in use.
• If the unit does not operate properly, turn it off immediately and contact a specialist
workshop in your area.
• If the power cord or plug is damaged, it must be replaced by the manufacturer, an
authorised specialist or a similarly qualified person.
10034685, 10034686
220-240 V~ AC 50 Hz
433.82 MHz
Max. -27 dbm
22 W
193.23 m /min
3
Max. 50.3 dB(A)
6.9 kg