Medion MD 20130 Anleitung Seite 43

Menu point Function / sub-menu
Auto Image Adjust: Sets the horizontal and vertical position, phase (fine tune) and clock cycle
(H size) automatically.
Contrast: Sets the white value of the monitor foreground.
Brightness: To adjust the brightness of the video.
DCR: You can switch the DCR function (dynamic contrast) on and off here
Input select: The signal input will be switched VGA, DVI, HDMI and Auto (Automatical selection
of the signal input), if you press "Input Select".
Audio Adjust: For setting the audio function.
Volume: Sets the sound output of the loudspeakers.
Mute: Enables the selection between Mute On/Off.
Color Adjust: For the selection of the colours, in order to improve the brightness and the colour
saturation. Selection can be made between: Cool, Normal, Warm and user-defined colours.
Cool : Adds blue to the monitor, creating a cooler white.
Normal : Adds red to the monitor, creating a warmer white and a brighter red.
Warm : Adds green to the monitor, creating a darker colour tone.
User Color: Individual settings for red(R), green(G) and blue(B).
Information (Information): Displays information about the current input signal of the
graphics card of your computer.
Manual Image Adjust: Horizontal size. H./v. position, fine tune, sharpness, aspect ratio and
optical colour mode.
Setup Menu: Set the language, OSD position and OSD time out.
Memory Recall: To recreate the factory settings for controlling video and audio.
Horizontal size: Sets the width of the monitor.
H./V. Position: Sets the horizontal and vertical position of the video image.
Fine Tune: Fine tune to improve the display of the TFT monitor.
Sharpness: For the adjustment of the clarity in the case of a signal that does not
correspond the the physical resolution of the screen.
Video Mode Adjust: An image size from options Full Screen,
Over Screen and Aspect Ratio.
Language Select: Enables the user to select between the available languages.
OSD Position: Horizontal and vertical setting of the OSD position.
H. position: For the horizontal setting of the OSD position.
V. position: For the vertical setting of the OSD position.
OSD Time Out: For switching off the On Screen Display (OSD) automatically
after the expiry of a preset period of time.
Front Operating elements
DE
EN
FR
ES
IT
NL
DK
13