Attaching A Speaker Stand; Risk Of Damage; Troubleshooting - Medion LIFE P61200 Bedienungsanleitung

10. Attaching a speaker stand

There is a stand mount ( 36 mm) on the underside of the sound system for
attaching a speaker stand
NOTICE!

Risk of damage!

Risk of damage to the device due to incorrect assembly.
 Observe the assembly instructions and specifications
in the user manual of the speaker stand to prevent
damage to the sound system.
 Observe the size and weight class of the sound
system and use only appropriate, suitable speaker
stands.
 Attach the speaker stand to the stand mount on the underside of the sound
system.
 Screw the supplied locking screw from the outside into the thread on the stand
mount to secure the speaker stand to the sound system.

11. Troubleshooting

PROBLEM
The device cannot
be switched on.
No sound
4
Not supplied
4 .
POSSIBLE CAUSE
The mains cable is not
connected properly.
The battery is not
charged.
The volume is set too
low.
The wrong operating
mode has been selected.
REMEDY
 Ensure that the mains cable
is properly connected.
 Connect the sound system
to a power socket using the
supplied mains cable.
 Set the volume to a higher
level.
 Check the volume set on
the external audio playback
device and, if necessary,
increase it.
 Press the FUNCTION
button once or several times
until the correct operating
mode is displayed on the
connected device.
DE
EN
FR
ES
IT
NL
53