Zanussi EMZ17-SSB Gebrauchsanweisung Seite 35

The required temperature is reached when:
a. the espresso dispensing button lights continuously;
b. and the temperature gauge needle is in position
9. Press on the espresso dispensing button
will flow directly into the cup. When the water reaches 2/3
of the cup, press again on the espresso dispensing button
to stop the water flow.
10. Pour out the water of the cup and start again.
11. Press on the steam dispensing button
empty pitcher under the steam nozzle and produce steam
by turning the steam knob controller to its max position
for 2 minutes. switch off the steam mode by turning the
steam knob to position 0.
12. Press on the ON/OFF button
appliance and let the descaling solution circulates through
the appliance's internal circuits for 15 minutes.
13. Press again on the ON/OFF button
appliance, place a large cup under the filter holder and press
on the espresso dispensing button
phase. Proceed to let the descaling solution flows until the
water tank is empty.
14. Press on the ON/OFF button
appliance, remove the water tank and fill it with cold clean
water up to the MAX level. Press again on the ON/OFF
button to switch on the appliance, place a large cup
under the filter holder and press on the espresso dispensing
button after the preheating phase. Proceed to let the
clean water flows until the water tank is empty.
15. Press on the ON/OFF button
appliance, wait until the appliance cools down before
cleaning the removable parts of the appliance.
16. Wipe the surface of the appliance with a soft cloth.
www.zanussismallappliances.fr www.zanussismallappliances.be www.zanussismallappliances.nl
, the water
, place an
to switch off the
to switch on the
after the preheating
to switch off the
to switch off the
.
35