Installation; Installation Of Bullet Cameras - urmet 1099/500 Schnellanleitung

EN
recording. The manufacturer is NOT in any way liable for any usage of the product
which might result not compliant to the relevant norms.
Firmware upgrade
Contact Customer Service Technical Assistance URMET S.p.a. in order to check
availability of firmware upgrades.
Network configuration
Camera default setting is DHCP mode. If the network does not support dynamic
addressing (DHCP), the device will automatically switch to factory IP 192.168.1.168. Use
Urmet "Device Config. Tool" software provided with IP Camera CD in order to modify the
IP address and other network settings to prevent any conflict with other devices on the
network.
Network connections
When connecting a PC (using Software Client or Browser), any video channel on the
PC will be using "unicast" connection (TCP, RTP, UDP).
The device can support up to 10 "unicast" connections so it is possible to show the
video on maximum 10 remote devices (PC or smartphone) at the same time depending
on the available network band.

Installation

INSTALLATION OF BULLET CAMERAS

Ceiling Mounting
Insert three expansion bolts in place into the ceiling and fix the equipment
with three locking screws
Completion of Installation
30
DS1099-044E