CSL PCIe USB 3.2 Gen1 Benutzerhandbuch Seite 9

Open the folder „PCIe USB 3.2 Gen1. Card" and navigate to „EXE".
Start the file „VIA_XHCI_Driver_V4.90A_AP.exe" with a double-click.
A sceruity question is shown which has to confirmed with "Yes".
Follow the wizard's instructions to complete the installation. The device is now
ready for use.
5. Safety instructions and disclaimer
Please do not attempt to perform repairs or conversions of the plug-in card. Avoid
contact with the power grid. The product is only voltage-free once it has been
unplugged. Always ensure that you are grounded before you touch electronic
components. This will prevent damage caused by electrostatic discharge from
your body.
Electrostatic discharge (ESD) can cause irreparable damage to your plug-in card
and all the connected hardware components! The installation of the plug-in card
is performed at your own risk. Please have the installation of the card performed
by a specialised company if you do not have any technical and practical experi-
ence in the field of computer and electrical technology. The manufacturer cannot
be held liable for any direct or indirect damage caused by improper installation or
use. It is the customer's responsibility to back up any data.
The device has not been approved for outdoor use. It should therefore only be
used in dry areas. Protect it against high humidity levels, water and snow. Always
9
English