Herunterladen Diese Seite drucken

TFA 30.1009 Bedienungsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für 30.1009:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
TFA_No. 30.1009_usw_Anl_04_21
Indoor-outdoor thermometer
For your safety
Keep this device and the battery out of reach of chil-
dren.
Batteries contain harmful acids and may be hazardous
if swallowed. If a battery is swallowed, this can lead to
serious internal burns and death within two hours. If
you suspect a battery could have been swallowed or
otherwise caught in the body, seek medical help imme-
diately.
Batteries must not be thrown into a fire, short-circuit-
ed, taken apart or recharged. Risk of explosion!
Low batteries should be changed as soon as possible
to prevent damage caused by leaking.
Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
Do not expose the device to extreme temperatures,
vibrations or shocks.
1. Getting started
Pull the protective foil off the display.
Open the battery compartment by pushing the cover in
direction of the arrow and remove the insulation strip.
The display shows the current indoor and outdoor
temperature.
8
06.04.2021
18:29 Uhr
Indoor-outdoor thermometer
Slide the °C/°F switch at the back of the instrument to
change between °C (Celsius) or °F (Fahrenheit) as
temperature unit.
2. Fixing
Position the thermometer near a window using the
built-in hanging slot with a nail or a screw or unfold
the table stand.
Lead the cable with the sensing element through the
open window to the outside. The cable adapts to the
window sealing shape. (Take care of sharp-edged win-
dow frames – avoid frequent opening and closing the
window).
Avoid radiators and direct sunshine.
3. Maximum and minimum values
Press the MAX/MIN button and the highest and lowest
indoor temperatures are displayed since the last reset.
Press the MAX/MIN button again, the display shows
the highest and lowest outdoor temperatures since the
last reset.
To go back to the present temperature display, press
the MAX/MIN button once more. The instrument will
automatically quit the MAX/MIN mode if no button is
pressed within 15 seconds.
Seite 5
9

Werbung

loading

Diese Anleitung auch für:

30.101230.1011