Werbung
STEP 2A Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall, must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
●
Stud center must be verified
●
DO NOT use the slotted holes for installation, only use the middle holes as shown
1.
Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2.
Position the wall plate
12
1
Max. 5/8 in.
(16 mm)
8
at your desired height and line up the holes with your stud center line and level the wall plate
Wood Stud Option
2
12
and mark the holes.
12
CAUTION:
DO NOT
use the slotted holes for
installation, only use the
middle holes as shown
Werbung
