Safety Functions - Eltac IN 20 Bedienungsanleitung

Changing between power level and temperature level operating modes
The smart combination of both cooking modes allows for a comfortable exploitation of all
advantages induction cooking provides.
You may change from the power level setting to the temperature level setting and vice versa at
any time.
To change over to the temperature level setting, activate the "TEMP" button during the power
level operating mode.
To change over to the power level setting, activate the "POWER" button during the temperature
level operating mode.
The value last set in the respective operating mode will be stored upon switch-over.
Setting the operating time (Timer) up to 180 minutes
The operating time can be activated during both the power level and the temperature level
setting.
Press the "TIMER" button in order to activate the operating time setting. This is indicated by the
value showing on the display and simultaneous glowing of the "TIMER" LED.
By pressing the + button, you can increase the preset operating time up to 180 minutes at
5-minute intervals at a time.
For a setting exact to the minute you can adjust the timer setting in 1-minute steps down to 1
minute by repeatedly pressing the – button.
Attention: If you reduce the operating time down to 0 minutes manually, the control will switch
over to stand-by mode!
When pressing either the + or the – button continuously, the preset operating time changes at
intervals of 0.5 seconds.
Approximately 5 seconds after setting the operating time the display will change back to the
original operating mode. The glowing Timer button LED shows that the "TIMER" function is
activated in addition. If the „TIMER" button is activated again, the remaining operating time will
appear on the display for about 5 seconds, and you may also choose to vary it further.
When the preset time has elapsed, there will be an audible signal and the control will
automatically switch over to the stand-by mode.
Note: Changing either the power or the temperature level does not affect the preset operating time.

SAFETY FUNCTIONS

This cooking plate comes with a number of safety features to protect the user as well as the
appliance against any unintentional or hazardous operating situations.
a) Operation control
If a button on the control panel is activated, all other buttons will be blocked except for the main
switch in order to avoid any malfunction. The control mode can be disabled via the main switch
at any time, regardless of whether any other buttons have been activated.
b) Operating time limitation
The operating time limitation will cause the cooktop to switch off automatically if the settings
have not been changed for a period of 2 hours. Such will happen independently of the level set
in each case. When automatic switch-off was effected, the cooking plate can be switched on
once more and the maximum operating time will be active again.
c) Residual heat indication
If the temperature on the cooktop has reached a value of more than 50 °C due to the waste heat
19