Resetting To The Factory Setting; Version Information - Bellman & Symfon AUDIO DOMINO Bedienungsanleitung

Please note that if the tone control is on, the preset value will be changed as
soon as the Tone Control is changed in user mode.
8 s
296

Resetting to the factory setting

You can use this to reset all settings to the
standard settings that the products were supplied
with from the factory.
Press and hold down the + button (9) until all the
LEDs on the display are lit. After resetting is com-
pleted, the display will blink for a short period.

Version information

The product version information is presented here
via a pattern of lit and blinking LEDs. This internal
information is only intended as an aid for servicing
and support.