Bellman & Symfon AUDIO DOMINO Bedienungsanleitung Seite 33

Pairing of units
The Transmitter and Receiver Units in the Bellman Audio Domino system must
have the radio link established in order for radio communication to operate.
To make it easier to get started, a Receiver Unit and a Transmitter Unit which
are paired together are always supplied so that they will work together. Where
you want to pair a Receiver Unit with a Transmitter Unit which is different from
the Receiver Unit it was originally supplied with, you can do this in the Settings
Menu. Proceed as follows to pair up the units:
5 s
A "running light" on the Receiver Unit's Volume and Tone LED Indicator (8)
moving towards the centre indicates that the link has been established.
5 s
• Start both the units with
the On/Off buttons i
(6, 18).
• Go into the Settings Menu.
• Hold down the CONNECT
button (19) on the Trans-
mitter Unit.
• Hold down both the M
button (5) and the R but-
ton (7) on the Receiver
Unit.
APP
297