Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FIRST LOAD
This function allows you to activate the gearmotor for loading pellets continuously.
Before starting the function, make sure the stove is cold and "OFF".
To set: OK > SETTINGS > FIRST LOAD
To stop continuous loading, just press and hold key 6 for 2 seconds.
Quick access:
Before starting the function, make sure the stove is cold and "OFF".
Press keys 6 + 4 at the same time for two seconds until the message "FIRST LOAD" is displayed.
To stop continuous loading, just press and hold key 6 for 2 seconds.
DELTA T
This function allows the hysteresis thresholds to be set for stove ignition (DELTA-T ON) and switch-o (DELTA-T OFF), used as an ambient
temperature adjustment interval if not managed by an external thermostat.
The possible values of DELTA-T vary between 0.5 - 5 °C
To set: OK > SETTINGS > DELTA T
RESET
Allows the user to reset all editable values to the default values.
To set: OK > SETTINGS > RESET.
DEPRESSURE NOTICE
Allows the radio control buzzer to be activated for an acoustic warning if the door is opened.
Please note: Activation can reduce battery life by 30%.
The battery life depends on the usage
To set: OK > SETTINGS > DEPRESSURE NOTICE.
DELAY SWITCH OFF
You can program a delayed switch-o for the stove. For example, if it is 8 pm and the delayed switch-o is set to 1h, the stove will automatically
switch o at 9 pm.
If you press and hold keys 6 + 2 at the same time, the screen "DELAY SWITCH OFF" will appear, (this setting can only be con gured if the
stove is in the PREPARATION or WORK phase .
Use keys 2 and 3 to increase/decrease the number of hours after which the stove will automatically start the nal cleaning phase.
The number of hours range from OFF, 1 to 9.
Press P6 to con rm and return to the home page.
One hour after the set switch-o time, the remaining operating time is indicated by displaying at one-minute intervals "switch o in" and
the time "HOURS xx:xx".
66
ADDITIONAL FUNCTIONS
ENGLISH
Werbung
Inhaltsverzeichnis
