Dal Zotto LEYLA ELITE Benutzerhandbuch Seite 61

BURN POT AND COMBUSTION
CHAMBER:
Š Remove the pellet slide assembly completely,
empty out any ash residues in the burn pot below.
Š Remove the burn pot and empty out any ash
residues.
Š Vacuum the ash from the combustion chamber
and glow plug tube.
Š Vacuum the ash behind the glass cleaning
de ector (1).
Š Clear all the holes in the burn pot using the
special tool supplied.
Š Put the burn pot back in place and push it
towards the back wall.
Š Put the pellet slide assembly back in place
above the burn pot.
Make sure that the burn pot and pellet slide have
been positioned correctly!
NOTE: Use a suitable vacuum cleaner with dedicated
separation container for the ash collected.
EXTRACTABLE ASH DRAWER 1:
Š Remove the ash drawer and empty it into a
suitable container.
Š Put the ash drawer back in place.
EXTRACTABLE ASH DRAWER 2:
Š Remove the ash drawer and empty it into a
suitable container.
Š Clean the ash drawer compartment.
Š Put the ash drawer back in place.
1
1
2
ENGLISH 61