Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SIM CARD SETTINGS
Avire SIM cards come preconfigured to be used with our products
immediately after plugging them in. If you are using a different SIM card, you
may need to unlock it via its PIN code in order to connect with the mobile
operator. In this case, follow either of these steps:
OPTION 1 (RECOMMENDED)
You can program the PIN code of the SIM card into the Universal Gateway using an
analogue phone plugged into to the J7 connection. (See fig 1)
Enter configuration mode :
Update SIM card PIN parameter:
is the PIN code given by the service provider.
At this point, the SIM card LED will stop flashing in red. If it does not, make sure the SIM
is correctly inserted and you entered the correct PIN.
OPTION 2
Disable the blocking PIN code using a conventional mobile phone. Plug the SIM into a
different mobile device and unlock it in the device settings.
BASIC GSM GATEWAY
In this operation mode, the Universal Gateway can be used as a converter for an
analogue phone line into a GSM line. It can send and receive data by DTMF and place
voice calls for trapped personnel.
Parameter P020 must be set to 00 in configuration mode.
fig 5
Werbung
Inhaltsverzeichnis
