Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONNECTIONS
To access the dipswitches and all connections, please open the Universal Gateway case by
unfastening the front screw (PZ1) and removing the lid.
fig 1
fig 2
Connector
J1
J2
J3
J5
J7 or J8
J10
Jumper switch for coverage meter
INSTALLATION
the plugs and screws provided with the device. Then hang the Universal Gateway on
these two points using the tear-shaped bracket.
Connector Description
Antenna
Sim Card
Battery
Power Supply
Phone Line
Before fixing the device in place, check the network coverage
within the immediate environment. The Universal Gateway can be
used as a coverage meter by connecting the battery cable to J3
and changing the jumper switch J10 to ON (see fig 1). The five LEDs
on the front of the unit will show the network signal level. Once a
suitable location has been found, switch J10 back to OFF.
To fix the device in position, drill two holes in the wall and insert
Terminal
1
2
1
2
1
2
Signal
7.2V
0V
L
N
TIP
RING
Werbung
Inhaltsverzeichnis
