Unpacking Ride-On Mower (01, 02); Scope Of Supply (03); Tools Required; Assembly - AL-KO SOLO R7-62.5 Montageanleitung

GB

2 UNPACKING RIDE-ON MOWER (01, 02)

The ride-on mower is delivered partly disassem-
bled on a metal pallet (01).
1. Place the pallet on level ground during un-
packing.
2. Remove all accessory kits (01/1) and the
packaging materials.
3. Remove the 6 bolts and nuts (01/2) and lift
the upper part (01/3) off the pallet (01/a).
4. Remove the locking wires (02/1) from the
wheels (02/2) using pliers.
5. Remove the wooden blocks (02/3) from the
wheels.
6. Push the ride-on mower forwards off the pal-
let.
7. Secure the ride-on mower to prevent it from
rolling away (e.g. with wheel chocks).
NOTE
Return the packaging materials to your
dealer or dispose of it in accordance
with your national environmental protec-
tion laws.

3 SCOPE OF SUPPLY (03)

The items listed here are part of the scope of
supply. Check that all items are included:
No. Component
1 Ride-on mower
2 Operator's seat
3 Frame for grass catcher
4 Steering wheel with extension
5 Bag with screws and instructions
6 Extension lever for grass catcher
7 Cover for steering column
8 Grass catcher
9 Rubber strap for starter battery
10 Starter battery 12 V, 9 Ah
11 Disengagement linkage
14
Unpacking ride-on mower (01, 02)

4 TOOLS REQUIRED

The following tools are required for assembling
the ride-on mower:
5 mm Allen key
Phillips screwdriver
10/11 mm spanner

5 ASSEMBLY

WARNING!
Danger if assembly is not carried out
completely!
Do not operate the ride-on mower before
it has been fully assembled!
Carry out all the work described in the
assembly instructions. If you are uncer-
tain about anything, ask a specialist to
confirm that the assembly has been car-
ried out correctly before the machine is
started up!
Check whether all safety and protective
devices are in place and functioning cor-
rectly!
The following assembly jobs must have been car-
ried out correctly before the ride-on mower can
R7-62.5 | R7-63.8 A | R7-65.8 HD
Flat-blade screwdriver
8/9 mm spanner