Dial Mode; Recall; First Ring; System Pin - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

Dial Mode

There are two different options you can use.
Tone
Tone dialling is the most popular dialling method nowadays.
Pulse
Pulse dialling is normally used with older PBX devices.
Press the  or  directional control buttons [4] to select the desired option. To save the selected
setting, press the Phonebook button [3]. A confirmation beep can be heard.

Recall

You can use the Recall/Flash (R) function with the Recall/Flash button
during a phone call. When using your phone with a PBX, this feature also allows you to put an
external call on hold and make an internal call, or to forward the external call to a different
extension. The Recall/Flash function will cause a short, temporary line interruption.
The following options are available:
Short
100 ms interruption.
Long
300 ms interruption.
Press the  or  directional control buttons [4] to select the desired option. To save the selected
setting, press the Phonebook button [3]. A confirmation beep can be heard.
The Recall/Flash function allows you to use specific services for external phone calls,
e.g. "Call Waiting". The requirement for this is that your network provider supports this
feature. It may also be used for additional functions or switching to an internal
conversation when using a PBX.

First Ring

By default, this functions is set to "ON". This will generate the first ring tone as soon as the first
incoming signal is detected. When set to "OFF", the first ring tone will be generated after the
second incoming signal is detected.

System PIN

The PIN must consist of 4 digits. To change the PIN code of your phone, proceed as follows:

After confirming by pressing the Phonebook button [3] the message "System PIN:"
appears on the display [2].
SilverCrest SDT 1.7 A3
[4] on your handset
English - 85