Specifications - Stihl AR 2000 L Gebrauchsanleitung

20 Specifications

Condition LEDs and
Beeps
3 LEDs flash
red.
3 LEDs glow
red.
4 LEDs flash
red and short
beeps sound in
quick succes‐
sion.
Runtime of cord‐
less product is
too short.
Battery cannot
be found with
STIHL App.
Charge process 1 LED glows
does not start red.
when AP adapter
is inserted in the
charger.
19.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information visit https://
support.stihl.com/ or https://www.stihl.com/.
20 Specifications
20.1 STIHL AR 2000 L, 3000 L
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
0458-820-9921-B
Cause
There is a malfunction
in the battery.
Cordless product too
hot.
There is a malfunction
in the battery.
No electrical contact
between cordless pro‐
duct and battery.
Cordless product or
battery damp.
Battery not fully char‐
ged.
Normal battery life
has been exceeded.
®
Bluetooth radio inter‐
face on battery or
mobile device is deac‐
tivated.
Distance between bat‐
tery and mobile
device is too long.
Battery too hot or too
cold.
– Energy content in Wh: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
Weight
– AR 2000 L: 7.4 kg
– AR 3000 L: 9.5 kg
USB port: Plug type A
– BC1.2 (DCP)
– Output voltage: 5 V
– Maximum charging current:1.5 A
– Bluetooth
Remedy
► Disconnect battery and then reconnect
it.
► Switch on the cordless product.
► If 3 LEDs continue to flash red: Contact
a STIHL servicing dealer for assistance.
► Disconnect the battery.
► Wait for cordless product to cool down.
► Take the battery off your back.
► Disconnect battery and then reconnect
it.
► Switch on the cordless product.
► If 4 LEDs continue to flash red and short
beeps sound in quick succession: Do not
use or transport the battery, contact your
STIHL servicing dealer.
► Disconnect battery and then reconnect
it.
► If the cordless product still does not run
when switched on or cuts out during
operation: Clean contacts of the connec‐
ting cable.
► Allow cordless product / battery to dry.
► Recharge the battery fully as described
in the instruction manual for the STIHL
AL 300 and AL 500 chargers.
► Replace the battery.
► Activate Bluetooth
®
battery or mobile device.
► Reduce distance,
► If battery still cannot be found with
STIHL App: Contact a STIHL servicing
dealer for assistance.
► Leave AP adapter in the charger.
Charge process starts automatically as
soon as permissible temperature range
is reached.
®
radio interface:
English
radio interface on
20.1.
29